Store opening times: 09:30 until 17:30 - 7 days a week

Building a pond

You can add water features to your garden whatever its size. From small container ponds to rigid moulded liners or flexible butyl liner for a pond in whatever shape you want – you'll find them all in our garden centre. Follow our five steps to install your pond safely and successfully.

1: Dig your hole to the size you want it. A depth of 75cm is plenty for most ponds: cut shelves into the sides for planting (if using a rigid liner, follow its contours).

2: Remove stones and any debris sticking out of the ground which might puncture your liner.

3: Line the hole with a thick 5cm layer of sand so your liner sits on a smooth surface. Old carpet works well, too.

4: Install the liner: unfold butyl completely before working it into place, keeping creases to a minimum. Rigid liners must be completely level: adjust as necessary, then back-fill round the edges with more sand.

5: Fill with water using rainwater from your water butts if possible to avoid tap water chemicals. If you have to use tap water, let it stand for a few days before introducing fish.

Please ask the staff in our garden centre in Enniskerry for more information and advice about building ponds.

View more categories in the category Ponds